Hot rolled 30*30*3 304 stainless steel angle bar 

Chemical Composition (%):

304:

C:≤0.08 ,Si :≤1.0 ,Mn :≤2.0 ,Cr :18.0~20.0 ,Ni :8.0~11.0,P :≤0.045,S:0.020~0.030

304L:

C:≤0.03 ,Si :≤1.0 ,Mn :≤2.0 ,Cr :18.0~20.0 ,Ni :8.0~11.0,P :≤0.045,S:0.020~0.030

Introduction of grade 304

304 stainless steel is an universal stainless steel material, has better anti-rust performance than the 200 series stainless steel material . and has high temperature resistance , temperature reaches 1000-1200 degree. 304 stainless steel has excellent stainless steel corrosion resistance and good resistance to intergranular. In the experiments: 304 has very strong corrosion resistance in boiling nitrate solvent which contains less than 65% concentration. Also has good corrosion resistance to alkali solution and most organic and inorganic acid.

304 grade is a widely used steel ,has good corrosion resistance, good heat resistance, low temperature strength and other mechanical properties; pressing, bending and other thermal processing, without heat treatment Hardening (non magnetic, with super temperature -196 to 800 degree).
 

Specification

201/202/304/321/316 etc Stainless Steel Angle In Stock And Theoretical Weight Table

Application:

Food processing equipment, particularly in beer brewing, milk processing & wine making.

Kitchen benches, sinks, troughs, equipment and appliances

Architectural panelling, railings & trim

Chemical containers, including for transport

Heat Exchangers

Woven or welded screens for mining, quarrying & water filtration

Threaded fasteners

Springs

Wuxi Zhonglian Yongsheng Special Steel Co., Ltd. is located in Wuxi, Jiangsu Province . It is one of stainless steel bases in China. Our factory covers an area of 60,000 square meters. We are one of the Jiangsu stainless steel manufacturers.

At present, we have five finishing rolling production lines and two hot rolling production lines: one is 60 and 90 piercing machine, mainly produces stainless steel pipe with outer diameter of 22mm-750mm; the other is 325mm ASSRL pipe rolling machine, which adopts mandrel pre-wearing and limiting Small cycle, three-level computer-controlled automation system . The stainless steel sheet hot rolling product line was established on December 28, 2011 and finished on July 11, 2014 . In the first Hot Test on July 1, 2014, qualified Hot Coil was rolled out successfully, which has few Existing precedents in the world Hot rolling mill. This proves ZLYS excellent management ability and profound technical background again.The main equipment of hot rolling mill includes one stepper beam heating furnace, one high pressure descaling machine, one coarse rolling mill with vertical roller, one Steckel mill(rolling mill), one laminar cooling equipment and one coiler. The whole equipment is provided by Japanese ITOCHU design.Our factory adopts the unique Steckel mill, which has the following distinctive characteristics: coil furnace can heat and insulate steel strip, so it is suitable for rolling high alloy steel and rolling thin material. In addition, advanced automatic width control system (AWC), automatic thickness control system (AGC), bending roll system, work roll channeling roll system and other effective measures are adopted to guarantee product quality. The annual output of the factory is 600,000 tons of stainless steel, the product specification is: thickness 2.0~ 12.7mm, width 800 ~ 1600mm roll weight Max30 tons. The construction of the second cold rolling product line was started on December 1, 2013, and completed and put into operation in March, 2015.There are mainly two 20-roll sengiel mill (ZRM), one annealing pickling production line (CAPL), one set of steel coil preparation unit (CBL), one set of longitudinal shear unit (STL) and six sets of roller equipment . Coil packing (Coil packing) 1 set .The product specification of the factory is (0.3~5.0)* (1000~1600) mm. We introduced France DMS 20 - roll sendzimir mill ; CAPL equipment all from Germany, Holland and other European countries introduced . The laser welding machine of production line is used for the first time in China's stainless steel industry . Degrease equipment was installed to ensure multi-steel production . Online application of SPM and TL effectively reduced production cost . The back - sequence product is packed in full automatic steel coil.

Our main products including stainless steel pipe ,stainless steel plate , stainless steel bar , stainless steel coil , stainless steel round bar , Stainless steel square tube ,stainless i-beam , stainless angle steel , stainless steel channel , Hastelloy alloy , etc . Our company has the most advanced production equipment which guarantee the most advantageous product quality . Based on highly quality products and best service , we have develop clients all round the world ,our products are widely used in industry in USA ,Germany ,India ,Iran , Dubai , Iraq , Vietnam , Ireland , Singapore&n bsp;,and so on .The specifications are complete and the price is favorable. Our company can order various non-standard specifications on behalf of customers. , special material steel products, can be delivered to your door, ordering quickly.

After years of accumulation, Wuxi Zhonglian Yongsheng Special Steel Co., Ltd. and Chengdu Stainless Steel Tube Plant, Jiangsu Steel Pipe, Anshan Iron and Steel Group Stainless Steel Tube Plant, Baotou Iron and Steel Group stainless Steel Tube Plant, Hengyang, Metallurgical Steel, Wuxi Stainless Steel Tube Plant . A spot sales center was established and a good cooperative relationship was established. Our company can provide customers with different specifications and materials for stainless pipes, alloy steel product, round steel and non-standard thermal expansion stainless steel tubes.  All the stainless steel pipes operated by our company are in line with the national standards, and the original material list of the steel factory is attached. At the same time, we can also handle stainless steel pipe ordering business and railway and road transportation business of various specifications and materials for the majority of users.

Main materials: 301 ,304 ,304L ,304N ,304LM ,XM21 ,305 ,309S ,310S ,316 ,316TI ,316L,316N ,316LN ,317 ,317L ,321 ,347 ,329 ,405 ,409 ,430 ,434 ,444 ,403 ,410 ,420 ,440A ,2205 ,2207

 Wuxi Zhonglian Yongsheng Special Steel Co., Ltd. has: product development department, technical department, commercial department, production department, processing department, quality control department, special specification forging department, logistics department, finance department, management department and after-sales service department; For the majority of users to provide production, processing, sales, logistics and other one-stop services. Has a group of highly educated, skilled and skilled service team, strict quality management system and scientific and rigorous management mechanism; adhering to the principle of "quality first, customer first, technology first, service first", always maintain Steady growth has won numerous development advantages. The reputation of excellence, the excellence of products and the pursuit of perfect service are the key to the success of  ZLYS special steel's manufacturers. The company strives to create the best performance.

        Service and commitment:

　　Service three guarantees: guarantee quality, guarantee time, guarantee quantity.

　　Service tenet: strong strength, high quality products, low price, first-class service.

　　Solemn promise: Reply to the trust of the old and new customers with the best products, the best quality, the lowest price and the most perfect service.

　　Operating principles: customer first, Excellent quality, great variety, and reasonable price.

   Wuxi Zhonglian Yongsheng Special Steel Co., Ltd. will serve the majority of users with good reputation, strong strength, high quality products and low price. I would like to express my heartfelt thanks to the old and new friends and customers who have always cared, supported and helped the company! And sincerely hope to establish long-term cooperative relations with them, mutual benefit and common development .

Q1. Where is your factory ?
A1: Our company's processing center is located in Jiangsu, Wuxi, China.
Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.
We can provide a wide range of personalized services according to the customers' needs.